![]() ![]() Android is great in telling you the details of compatibility. The app should also be compatible with the OS version you are running. Just make sure that they have a configuration app for your device, otherswise, you might end up with a hardware but couldn’t just configure that. ![]() It is your app’s responsibility to use the presence of an iBeacon into something useful for your customers. The presence of an iBeacon assumes proximity to a particular thing or place. They are Bluetooth LE devices in peripheral mode. IBeacons implement the low energy part of Bluetooth 4.0 specification. These services give the details of what the device is able to do. You can display those services in an app to be displaoyed to the user. The details of these services can be discovered from the devices in the form of GATT (Generic ATTribute) profiles. They can then connect with peripheral and request the GATT services supported by the device in peripheral role.Įach Bluetooth LE device can support a list of services. These messages can be picked up by another LE device in central mode. In peripheral role, they can send advertisement broadcast messages for their presence. There are two central roles of Bluetooth LE devices. The last are Bluetooth Smart devices which only support 4.0 specification.īluetooth LE use the same spectrum as classic Bluetooth i.e. The other are Bluetooth Smart Ready which support both classic and low energy specifications. One is based on Classic Bluetooth not supporting the low energy specification. You would find three kinds of bluetooth devices. You can download the specification from. It is designed to provide Bluetooth based functionality without draining the battery power of your device.īluetooth LE is part of Bluetooth 4.0 specification. In order to re-enter normal operational model, simply remove and replace power to the device.What is Bluetooth Smart and Bluetooth LE?īluetooth Low Energy (Bluetooth LE) is also known as Bluetooth Smart. Reboot the beacon into Direct Firmware Update mode.Ĭontact Radius Networks support for information on the procedure for firmware update or replacement. Press the Action Menu button and select DFU. In order to re-enter configurable mode for a RadBeacon X2, remove the front cover and switch the beacon power switch to OFF and back to ON.Ī beacon set in configurable mode will be configurable for up to 30 minutes or until you lock the device again. In order to re-enter configurable mode for a RadBeacon Tag, remove the front cover and press the configuration push button switch near the coin cell battery. In order to re-enter configurable mode for a RadBeacon USB, remove and restore power to the device. The Lock feature is a security precaution to limit the possibility of third party manipulation of your beacons once they have been installed and configured. Submit a valid PIN to prevent connections from remote Bluetooth 4.0 devices to the beacon configuration service. Press the Action Menu button and select Lock. Submit a valid PIN to reset the settings for your beacon to factory defaults. Reset the device to the original factory settings. Press the Action Menu button and select Reset. Submit a new and existing PIN to update the PIN for your beacon. ![]() Press the Action Menu button and select Update PIN. Validate the accuracy of your beacon settings by quickly verifying the ranging behavior of your device in proximity to your configured beacon. Press the Action Menu button and select Range. Update the measured power value with the results of your calibration activity and update your settings. Press the Action Menu button and select Calibrate.Ĭalibrate the measured power value of the beacon settings to ensure optimal proximity events and ranging. ![]() Submit a valid PIN to update the settings for this beacon. Press the Action Menu button and select Apply. Select any RadBeacon in the table to view it's detailed settings. Each beacon discovered is displayed with the following summary details Scan for nearby configurable RadBeacons by swiping down on the RadBeacons table. Once discovered, you can display each beacon's operating settings and make modifications to those settings. With the RadBeacon app you can scan for nearby configurable Radius Networks beacons. The RadBeacon app from Radius Networks requires an iOS iPhone, iPad or iPod touch running iOS 7.1 or higher and equipped with Bluetooth 4.0 capabilities. The RadBeacon™ app is the configuration utility for RadBeacon proximity beacons from Radius Networks that support Apple's iBeacon™ proximity services as well as other emerging proximity services. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |